Aircon Installation in Singapore

Aircon installation pricing in Singapore varies based on system configuration, brand choice, and your specific layout. As a general guide for full new installations: a System 1 typically ranges from $1,000 to $2,000; System 2 from $2,000 to $3,000; System 3 from $3,000 to $4,000; and System 4 from $4,000 to $5,000.

If you are doing a straight replacement (swapping the condenser and fan coils while utilizing your existing piping layout), costs are lower but still depend on unit capacity, for example, a basic 9k BTU System 1 swap starts around $700. With your existing piping, wiring and trunking reused, our replacement prices are: System 2 from $1,850 (Midea) to $2,200 (Daikin), System 3 from $2,550 to $3,350, and System 4 from $3,000 to $4,080, with delivery, removal and disposal of your old aircon free. Structural additions like compressor brackets (~$150), extensive ceiling modifications, or extended trunking runs will adjust the final total. To give you an exact, zero-guess price, we always provide a comprehensive, free on-site survey first.

We install all major airconditioning brands available in Singapore, including Daikin, Mitsubishi Electric, Mitsubishi Heavy Industries, Panasonic, Midea, Hitachi, Toshiba, LG, Samsung, Fujitsu, Gree, and York. Because we are completely brand-neutral, we do not tied to any single manufacturer or push specific inventory. If you have a preferred brand, we will install it flawlessly. If you need guidance, we will give you an honest breakdown of the pros and cons of each brand so you can make an informed decision.

We stay independent, so we have no reason to push one brand. We buy units from engineering suppliers, combine them with our workmanship and materials, and give you a transparent total. That leaves us free to recommend the system that fits your budget and layout.

Our refrigerant lines use single-piece copper pipe insulation with a durable outer plastic layer over the foam core, rather than an aluminium-foil wrap. We don’t tape or glue structural joints, which are typical spots for condensation leaks. For drainage, we use a minimum 16mm thick PVC pipe wrapped in 3/8-inch insulation and sloped so water drains away smoothly.

Your investment is protected by two separate warranties. First, we provide our own 1-year workmanship warranty covering the entire physical installation; if any structural or alignment issue arises within 12 months, we resolve it completely free of charge. Second, you receive the standard manufacturer factory warranty. For instance, brands like Mitsubishi Electric typically provide 1 year of full coverage on functional spare parts and 5 years specifically on the compressor core. We will explicitly clarify the exact warranty terms of your chosen brand before you sign off.

Yes, we do. We maintain a select stock of fully tested, reconditioned units at our warehouse as a cost-effective alternative for rental properties, short-term setups, or budget-conscious projects. While these units no longer carry official factory warranties due to their second-hand nature, we install them using the exact same premium materials and back them fully with our 1-year structural workmanship warranty for your peace of mind.

Yes, 100% free with zero obligations. Every single installation project starts with a comprehensive on-site assessment. Our technical team visits your property to evaluate room sizing, existing trunking/piping integrity, external condenser ledger space, electrical panel loads, and potential installation obstacles. This allows us to issue an ironclad, line-itemed quote based on physical reality rather than a rough online guess.

The duration depends entirely on the scope of work. A clean, straightforward System 1 replacement utilizing your existing, functional piping can be completed in roughly 4 hours. A complete, fresh System 4 multi-split installation involving brand-new structural runs and trunking layout usually takes one full working day. Complex multi-zone VRV/VRF or concealed ducted systems for large properties can span multiple days. We will provide a definitive time tracking schedule during your site survey.

While most full installations are scheduled a few days in advance to secure specific stock and coordinate team assignments, we do prioritize absolute emergencies (such as a total system failure in a sensitive environment). If our current service schedule and warehouse stock permit, we can fast-track same-day deployments. Same-day service is subject to availability, but we always do our best to assist in critical situations.

Yes, our mechanical teams are fully equipped for large-scale residential and commercial systems. We regularly handle System 4 and System 5 multi-splits, commercial VRV/VRF engineering for landed properties and corporate spaces, ducted/concealed ceiling units, and structural cassette configurations. Whether it is a multi-story landed home requiring 10+ fan coils or an F&B commercial buildout, we have the engineering capabilities to execute it seamlessly.

Absolutely. We work hand-in-hand with interior designers, structural builders, and renovation contractors during the hacking and roughing-in phases. This is the optimal time to involve us, as it allows our teams to conceal structural refrigerant lines behind partition spaces, route drainage paths cleanly before plastering, and mount brackets perfectly. Contact us early in your design phase to schedule a seamless timeline integration.

Yes, we handle complete system asset relocations, whether you are moving an indoor fan coil to a different wall within the same room or transferring a complete multi-split system to an entirely new property. Our service includes careful decommissioning, system pump-downs to preserve refrigerant gas, transport, structural re-piping, mounting, and comprehensive performance testing. Due to layout differences, relocations are priced via our free site survey.

We provide island-wide installation coverage across all areas of Singapore, servicing HDB estates, condominiums, landed properties, and commercial zones alike. From major hubs like Tampines, Bedok, and Pasir Ris in the East to Jurong, Choa Chu Kang, and Woodlands in the North and West, our engineering teams are fully mobile. For new BTO key handovers and active renovation zones, we sync directly with your primary site supervisor for punctual delivery.

The number is how many indoor units run off one outdoor compressor. A System 1 is 1 outdoor unit and 1 indoor unit, while a System 4 is 1 outdoor unit running 4 indoor units. Which one suits you depends on how many rooms you want to cool and how you use them, and we go through that at the free site survey.